How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have to follow a series of special steps to install an additional ignition key. This requires the use of a handheld computer, known as Tech-2 that is operated by the dealer. Then the transponder must be replaced and a key must be purchased.
Make sure to rotate your keys in order to prevent one from wearing out faster than the next. This will also help to keep your keys in good condition.
Replacement Case
The new key fobs for keys are not like the old Saab keys. They are equipped with electronics which make it hard to copy. This has made stealing cars much more difficult than it was twenty years ago. But, it has also made replacing lost keys a more expensive task.
Every owner of a Saab 9-3 must have at least two functioning keys. If one is lost it costs a lot to add another to the car since it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100-$200 for this.
There are several ways to get around these expensive. Some parts dealers will use the code of the spare key to cut a brand new metal blade for less than what the dealer charges. The key, however, must be the same as the original one in order to function in your vehicle.
Follow these steps to replace the case. You'll need a flathead screwdriver along with some patience. With the screwdriver, you can pry apart the plastic and remove the emergency key. Once you have the case open, remove the electronics and place them into your new case. Make sure you insert the correct key and badge into the case.
Replacement Battery
The Saab 9-3 replacement battery is a cheap component that can be easily and quickly replaced. The YouTube video of Cyclone Cyd shows how to replace the remote fob battery with just four simple steps. This tutorial can be used for any modern saab key fob however the procedure might differ slightly.
The first step is to find the button that lets off the backup key inside the fob. This is usually located close to the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver into the tiny hole on this button. This will allow you to open the fob's case so that you can replace the battery.
Once the new CR1632 battery is installed You can then reassemble the remote key fob, and then program it to your car. The entire process should not take more than an hour, if not less. It's a very easy process that does not require any special tools.
The procedure is a little more complicated if you've lost your key, but still possible. The dealer has to first verify the VIN of the vehicle and order the replacement TWICE module as well as key blade with the proper unique code. After that, they'll be required to cut the replacement key and then program it with the latest software tool known as MDI.
Replacement Key Fob
The key fob is the part that locks and unlocks your car. It is equipped with an internal battery. They have a limited life span and will eventually die. This is a typical issue that affects all cars, and the good news is that you can change the batteries in a majority of fobs, without replacing the entire case. You can buy fobs replacements on Amazon that come with all the electronics already installed, which means you can simply open the case and replace those batteries that are old. It is important to note that you'll need to take out the emergency key first. you can do this by inserting a small flathead screwdriver into the slot found in the middle of the case. The case will split when you move the screwdriver around it.
If you're looking to replace your keys, make sure you have an extra set on hand. This will save you lots of money. If you have a spare you can ask the dealer to cut an entirely new key and then program it to your car, which is cheaper than replacing the entire key fob.
If you don't have a spare one, you can add another key to your car, but this requires a lot of research and effort. It costs a few hundred dollars to purchase an additional car key. The computer in the car must also be programmed. This can be accomplished by a professional, however it's a costly option for the majority of owners.
Replacement Ignition
In contrast to earlier Saab vehicles, the latest SAAB 9-3 models have a much more sophisticated alarm system that is built on a key code. If you lose your primary key, it can be expensive to add another one since the car must have a specific computer installed and also be programmed to accept a brand new key. saab 93 key fob replacement of locksmiths aren't able to do this, and even a dealer will charge several hundred dollars to program the new key!
Dealers will charge you the highest price to replace your car computer (also known as the CIM or SAAB twice) when you lose your only working key. We can reprogram the current EEPROM on your car's computer so that it is prepared for a new key. This will save you more than 50% off the cost you have to pay a dealer.
If you've been a long-time owner of a 03-11 SAAB 9-3, you probably realize that the ignition key isn't really all that durable. If your ignition key is not working properly, you should consider replacing it. They can become extremely sticky and the buttons have been known to fall off. It's good to know that replacing the ignition key isn't as complicated as it seems and can be done fairly quickly using the appropriate tools.